TekJeep

← Home · Jeep models

Jeep MJ Comanche

1986–1992 · model hub

Look up what tires fit → · Stock specs →

1987 Jeep Comanche MJ pickup, front three-quarter view
Photo: CZmarlin (Christopher Ziemnowicz) · CC0 via Wikimedia Commons

Jeep’s compact pickup, built on the XJ Cherokee platform. Unibody cab with a boxed bed frame, Quadra-Link coil springs up front and longer leaf springs in the rear. Factory 4WD models use a Dana 30 front axle; the rear is most often a Dana 35, with a Dana 44 on some long-bed Metric Ton packages. Identify your axle before ordering parts. Engines commonly include the 2.5L four and the 4.0L inline-six (plus a 2.8L V6 in early years), and it’s a capable trail truck when you add lift and tires.

Bolt pattern
5×4.5" (5×114.3 mm)
Typical stock tires
~27–28" (often P205/75R15; options from ~P195/75R15 to P225/75R15)
Common upgrade
31" with a 2–3" lift; 33" with 3–4.5"+; 35s usually need 4.5–6" plus trimming
Lift notes
Front coil-spring and rear leaf-spring kits are the usual path (same family as the XJ). Watch control-arm angles, shackle angle, driveshaft length and unibody stiffening on taller lifts. Regear when you jump to 33s and up.

These are typical figures. Check your door-jamb sticker and owner’s manual, because trims and years vary.

Popular answers & guides

Have a different setup?

Ask TekJeep AI about your exact MJ Comanche, lift and tire size. It’s free.

Ask TekJeep AI All fit answers

Built one? Show us your build.