Jeep WJ Grand Cherokee
1999–2004 · model hub
Look up what tires fit → · Stock specs →

The second-generation Grand Cherokee and successor to the ZJ. Unibody with solid axles and coil springs at all four corners. Factory 4WD models use a Dana 30 front axle. The rear is typically a Dana 35 on many 4.0L models or an aluminum-center Dana 44A on many 4.7L V8 models—identify your axle before ordering parts. The 4.0L inline-six and 4.7L PowerTech V8 are the common U.S. powertrains, and it’s a capable trail SUV when you add lift and tires carefully.
- Bolt pattern
- 5×5" (5×127 mm)
- Typical stock tires
- ~29–30" (P225/75R16, P245/70R16, P235/65R17)
- Common upgrade
- 31" with a 2–3" lift; 33" with ~3–4"+; 35s usually need ~4.5–6" plus trimming
- Lift notes
- Spacer, coil-spring or long-arm kits are common. Watch bump stops, control-arm angles, CV front driveshafts on some transfer cases, and unibody stiffening on taller lifts. Regear when you jump to 33s and up.
These are typical figures. Check your door-jamb sticker and owner’s manual, because trims and years vary. Factory wheels often use ~6.0–6.25" backspacing—bigger tires usually need different wheels, not just height.
Popular answers & guides
- 33s with a 2" lift
- 33s with a 3" lift
- 33s with a 4" lift
- 35s with a 3" lift
- 35s with a 4.5" lift
- 33s with a leveling kit
- Regear for bigger tires
- Tire rubbing fixes
- Bolt pattern & backspacing
- Compare: 33s on a 3" ZJ
Have a different setup?
Ask TekJeep AI about your exact WJ Grand Cherokee, lift and tire size. It’s free.
Ask TekJeep AI All fit answersBuilt one? Show us your build.