← Back to TekJeep AI · All fitment answers

Will 37-inch tires fit a Jeep Gladiator with a 4-inch lift?

Fitment answer · Updated October 27, 2026

Short answer

Yes, for most Gladiators. A 4-inch lift gives good room for 37s, usually with little or no trimming. Bump stops sized for the tire, low-backspacing wheels and a regear round it out.

Shop the gear for this build ↓ Tires, deflators and a compressor picked for this setup.

What you usually need

Regearing

With 37s on a Gladiator, 4.88 or 5.13 gears are common, especially if you tow. Compare ratios in the Tire & Gear Calculator before you buy gears.

Compare

Gear for this build

Amazon Associates disclosure: As an Amazon Associate, TekJeep AI earns from qualifying purchases. These links include our affiliate tag tekjeep-20.

Ask TekJeep AI about this

FAQ

Is 4 inches enough for 37s on a Gladiator?

Yes, for most.

Do I need to regear?

Usually yes.

Will 37s rub?

Rarely with correct bump stops.

Check your numbers

Use the free Tire & Gear Calculator to see speedometer error, highway RPM and a regear target, or ask TekJeep AI on the homepage with your year, trim, lift and wheel specs.

Related guides: All-terrain & mud-terrain tires · JK 2.5" lift overview

More fitment answers: 35s on a Gladiator JT · 33s on a stock Gladiator JT · 37s on a Gladiator JT · 35s on a 2.5" Gladiator · 37s on a 3.5" Gladiator · 35s on a stock Mojave · 35s on a stock Gladiator Rubicon · 33s on a leveled Gladiator

Fitment disclaimer: Clearance depends on exact tire size, wheel specs, suspension and how hard you flex. Confirm with your tire shop or installer before buying.

Tire size how-tos: How to read a tire size · Bolt pattern & backspacing · Regearing for bigger tires · Tire pressure after upsizing · Speedometer error · Rubbing fixes

← All guides · TekJeep AI home