TekJeep

← Home · Jeep models

Jeep WK Grand Cherokee

2005–2010 · model hub

Look up what tires fit → · Stock specs →

2006 Jeep Grand Cherokee WK CRD Limited, front three-quarter view
Photo: Vauxford · CC BY-SA 4.0 via Wikimedia Commons

The third-generation Grand Cherokee and successor to the WJ. Unibody with an independent front suspension and a solid rear axle — the first Grand Cherokee to drop the solid front axle. Factory 4WD systems typically include Quadra-Trac I, Quadra-Trac II and Quadra-Drive II, depending on equipment. U.S. engines commonly include the 3.7L V6, 4.7L V8 and 5.7L HEMI V8; the 6.1L HEMI powered the SRT8, and a 3.0L CRD diesel was offered in some markets (briefly in North America). Identify your axle and transfer case before ordering parts.

Bolt pattern
5×5" (5×127 mm)
Typical stock tires
~29–31" (often P235/65R17 or P245/65R17; some trims P245/60R18). SRT8 uses low-profile 20-inch tires.
Common upgrade
31–32" with a ~2" lift; 33" usually needs about 2.5–3"+, control-arm correction and possible trimming. 35s are uncommon because of IFS limits.
Lift notes
Spacer or spring/strut kits are common. IFS and CV-joint angles limit how tall you can reasonably go — many kits stay in the 1.5–3" range. Watch caster/camber (front upper control arms on taller lifts), bump stops and a proper alignment. Regear when you jump to 33s and up. Many WKs use a Chrysler 8.25-class solid rear axle (often called a 213 mm unit); some SRT8 equipment is described with a heavier Dana 44 / 226 mm rear. Identify yours before ordering gears.

These are typical figures. Check your door-jamb sticker and owner’s manual, because trims and years vary. Factory 17-inch wheels often use ~6.25" backspacing — bigger tires usually need different wheels, not just height.

Popular answers & guides

Have a different setup?

Ask TekJeep AI about your exact WK Grand Cherokee, lift and tire size. It’s free.

Ask TekJeep AI All fit answers

Built one? Show us your build.