← Back to TekJeep AI · All fitment answers · WK hub
Will 35-inch tires fit a Grand Cherokee WK with a 4-inch lift?
Fitment answer · Updated November 10, 2026
Short answer
Not a typical bolt-on. 35s on a 4-inch WK are past what most IFS-friendly kits are designed for. CV-joint angles, alignment and fender clearance all get difficult; this is a custom build if it works at all. Many WK owners are better served staying at 33s on a well-set-up 3-inch lift.
Shop the gear for this build ↓ Tires, deflators and a compressor picked for this setup.
What you usually need
- A purpose-built geometry package — not just spacers — if you even attempt this height.
- Serious fender, bumper and liner work, plus wheels chosen for the WK unibody.
- Close attention to front CV-joint angles and alignment; these wear fast when you over-lift an IFS Jeep.
- Regearing and a realistic look at axle and driveline strength.
Regearing
35s on stock 3.07 or even 3.73 gears feel very slow; 4.10 is a common conversation. This size only makes sense as part of a full build, not a tire-only swap. Compare ratios in the Tire & Gear Calculator before you buy gears. Identify your rear axle (many WKs use a Chrysler 8.25-class / 213 mm unit; some SRT8 equipment is described with a Dana 44 / 226 mm rear) before ordering parts.
Compare
Gear for this build
Amazon picks for this setup (affiliate).
- WK 35" all-terrain tires (search) — Confirm you actually have clearance and geometry for 35s on this IFS platform before you buy.
- Digital tire pressure gauge — For airing down and back up accurately.
- Staun tire deflators — Repeatable trail pressures.
- VIAIR 88P portable compressor — Air back up before the highway.
Amazon Associates disclosure: As an Amazon Associate, TekJeep AI earns from qualifying purchases. These links include our affiliate tag tekjeep-20.
FAQ
Do 35s fit a Grand Cherokee WK with a 4-inch lift?
Not as a typical bolt-on; treat it as a custom build, if at all.
Is 4 inches enough for 35s on a WK?
Height alone is not the limit — IFS and CV angles usually are.
Do I need to regear?
Yes for drivability if you somehow get 35s under it; 4.10 is a common conversation. Identify the axle first.
Check your numbers
Use the free Tire & Gear Calculator to see speedometer error, highway RPM and a regear target, or ask TekJeep AI on the homepage with your year, trim, lift and wheel specs.
Related guides: All-terrain & mud-terrain tires · Tire rubbing fixes
More fitment answers: 33s on a 3" WK · 33s on a 2.5" WK · 32s on a 2" WK · 35s on a 4.5" WJ · 35s on a 4.5" ZJ · 33s on a leveled WK
Fitment disclaimer: Clearance depends on exact tire size, wheel specs, suspension and how hard you flex. The WK’s independent front suspension and CV-joint angles make this more sensitive than a solid-axle Jeep. Confirm with your tire shop or installer before buying.
Tire size how-tos: How to read a tire size · Bolt pattern & backspacing · Regearing for bigger tires · Tire pressure after upsizing · Speedometer error · Rubbing fixes